Professional Embroidery
More than just thread and needle—it's a high-impact, three-dimensional representation of your brand's commitment to quality.
Why Choose Embroidery?
Embroidery is the preferred choice for corporate identity, professional uniforms, and high-end retail. Unlike screen printing, embroidery utilizes high-sheen thread to create a textured, raised effect that conveys authority and longevity.
The "Executive" Look
It is the industry standard for polos, dress shirts, and outerwear. It suggests a higher level of investment in your team.
Permanent Durability
Embroidery does not fade, crack, or peel. It is designed to outlast the garment itself, even with frequent commercial laundering.
Multi-Color Efficiency
Since pricing is based on stitch count, not colors, you can use up to 15 colors in a single design for no additional cost.
Expert Guidance
Choosing the Right Apparel
Not every garment is a candidate for embroidery. The "Weight" and "Weave" of the fabric must be able to support the tension of thousands of stitches. We help you navigate:
- Polos & Knits: We recommend 180gsm+ weights to prevent sagging.
- Headwear: Structured caps allow for bold, "3D Puff" embroidery.
- Fleece & Softshells: We use specialized stabilizers to ensure the logo doesn't "sink" into the fabric.
- Dress Shirts: We utilize light-density digitizing to maintain the shirt's drape.
"We don't just put a logo on a shirt; we pair the right art with the right fabric."
The Anatomy of a Stitch
Experience the technical journey from your digital file to a finished piece of branded apparel.
The Digitizing Art
This is where the magic happens. We take your Vector Artwork and translate it into a stitch map. Our digitizers decide the stitch angle, pull compensation, and density to ensure your logo looks sharp and doesn't pucker the fabric.
Hooping & Backing
To ensure the logo stays perfectly centered and crisp, we "hoop" each garment by hand. We use a variety of "backings"—internal stabilizers that remain inside the garment to provide the structure needed for the stitches to sit flat.
Machine Calibration
Our multi-head industrial machines are calibrated for the specific thread type (Polyester vs. Rayon) and the needle size required for your fabric. A typical logo consists of 5,000 to 15,000 individual needle penetrations.
The Clean & Press
Once the machine finish, we perform manual thread trimming. Every garment is then steamed to remove any hooping rings and inspected for stitch quality before being folded and packed for you.
Understanding the Pricing
Embroidery is priced differently than printing. Because the "setup" (digitizing) is the most labor-intensive part, small orders carry a higher initial cost, while large runs become highly cost-effective.
| Order Size | Turnaround | Best For |
|---|---|---|
| 12 - 24 Pieces | 10-15 Days | Small Teams / VIP Gifts |
| 48 - 144 Pieces | 10-15 Days | Corporate Uniforms |
| 500+ Pieces | Contact Us | Major Events / Retail |
Pro Tip: Stitch Counts
Most standard pocket-sized logos are under 8,000 stitches. If your logo is very dense or has a solid background, the "stitch count" increases, which increases the machine time and the cost. We can often adjust the design density to meet your budget without sacrificing the look!
The Vector Foundation
Our digitizing software reads the mathematical paths of a **Vector File (.AI, .EPS, .PDF)** to determine the stitch direction. If you provide a "Raster" file (JPG or PNG), the edges of your logo are made of pixels, which results in "jagged" stitching.
Always send Vector art to ensure your brand's fine details are preserved in thread.
Ready to Start?
Whether you have a fully digitized file or just a napkin sketch, our Kelowna team is ready to guide you through the process.
Get My Embroidery Quote